标王 热搜: pcr  Bio  技术  RNA  TNF  VEGF  试剂盒  试剂  FGF  ELISA 
当前位置: 首页 » 下载 » 考 研 »

Human Dengue Virus NS1 antigen IgM ELISA Kit instruction

  • 文件类型:其他文件类型
  • 文件大小:1M
  • 更新日期:2011-04-19 11:29
  • 浏览次数:1010   下载次数:0

Kit name
Human Dengue Virus NS1 antigen IgM ELISA Kit
Intended use
The kit is used to assay the content of Human Dengue Virus NS1 antigen IgM in Human serum,blood plasma and other related tissue liquid.
Test principle
The kit uses a double-antibody sandwich enzyme-linked immunosorbent assay (ELISA) to assay the level of Human Dengue Virus NS1 antigen IgM in samples. Add Human Dengue Virus NS1 to pre-coated Human Dengue Virus NS1 microelisa well, incubation; washing. Add HRP tagged Human Dengue Virus NS1. After another incubation and washing, remove the unbound enzyme, add Chromogen Solution A and B, the color of the liquid change into blue, and the color finally become yellow at the effect of acid. The depth of the color is positively correlated with concentration of the Human Dengue Virus NS1 antigen IgM in samples.
Materials supplied
Microelisa Stripplate
Chromogen Solution A
Chromogen Solution B
20×wash solution
Stop Solution
Standard diluent
Sample diluent
Closure plate membrane
HRP-Conjugate Reagent
Sealed bags
Note: Standard was diluent with Standard diluent followed by:48、24、12、6、3、1.5ng/L.
Materials required but not supplied
1.         37 ℃ incubator
2.         Standard microplate reader
3.         Precision pipettes and Disposable pipette tips
4.         Distilled water
5.         Disposable tubes for sample dilution
6.         Absorbent paper
Assay procedure
1.        Prepare: The kit takeing out from the environment of 2-8℃ should be balanced 30 minutes at less in the room temperature before using.
2.        Diluent: Diluent the 20×wash solution.
3.        Add standard and Sample: Set Standard wells, testing sample wells and blank wells. Add Diluted standard 50μl to standard well; Add Sample dilution 40μl to testing sample well which on Assay plate, then add testing sample 10μl (sample final dilute degree is 5 times), blank well doesn’t add anyting.
4.        Incubation: Incubate 30 minutes at 37 ℃ in incubator.
5.        Wash: Discard Liquid, drying, filling in diluted washing liquid to each well, oscillation for 1 min, discard the washing liquid with absorbent paper Pat dry. Repeat three times, Pat dry.
6.        Add HRP-conjugate reagent: Add HRP-conjugate reagent 50μl to each well, except the blank well. Mixing gently shaking, incubated 30 minutes at 37 ℃.
7.        Repeat step4.
8.        Repeat step5
9.        Add chromogen solution A and B: Add chromogen solution A 50μl and chromogen solution B 50μl to each well. Gently mix, incubate for 15 min at 37℃.
10.    Add Stop Solution: Add Stop Solution 50μl to each well, Stop the reaction(the blue color change to yellow immediately).
11.    Take blank well as zero, measure the optical densit (OD) at 450 nm after adding Stop Solution and within 15 min.
12.    According to standard concentration and the corresponding OD values calculated standard curve linear regression equation, then the OD values according to the sample on the regression equation to calculate the corresponding sample concentration. It should be remembered that the sample has been diluted and its actual concentration should be multiplied by the total dilution.
Specimen requirements
1.      Can’t detect the samples which contain NaN3, because NaN3 inhibits HRP activity of the horseradish peroxidase.
2.      Extract as soon as possible after Specimen collection, Extracted according to the relevant literature, and should be experiment as soon as possible after the extraction. If it can not be tested immediately, specimen can be kept in -20℃ to preserve, but repeated freezing and thawing should be avoided.
3.      The samples shoule be centrifugated dequately and no hemolysis or granule was allowed.
Important notes
1.         The operation should be carried out in strict accordance with instructions and test results must be based on microplate reader to determine readings shall prevail.
2.         If the microelisa stripplate has not used up after open, it should be stored in the sealed bag.
3.         Recommended that all standard materials, test samples are doing double to minish the Experimental error.
4.         Please multiply total dilution times when calculation. 5 times is the best dilute time according to this ELISA Kit design.
5.         If the testing material content in the sample is excessively high, please use Special dilution to dilute certain multiple, then assay.
6.         If the color too shallow, It may be appropriate to extend the substrate incubation time.
7.         Add Sample with sampler each step and proofread its accuracy frequently to avoid the experimental error. In order to avoid cross-contamination, avoid to reusing the suction head and closure plate membrane.
8.         Use the kit in validity, not mix the reagents of different batches.
9.         Chromogen Solution B is light-sensitive, avoid prolonged exposure to light,
Summary procedures
Preparing reagents, samples and standard

Add prepared sample and standard, incubated 30 minutes at 37 ℃

Plate washed four times, adding HRP-Conjugate Reagent incubated 30 minutes at 37 ℃
Plate washed four times, adding Chromogen Solution A and B incubated 15 minutes at 37 ℃
Add stop solution

Measure within 15min

Assay range1.5-48ng/L
Package size:96 determinations
Storage  2-8℃.
validity six months.

[ 下载搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 违规举报 ]  [ 关闭窗口 ]


发布供求信息 推广企业产品
建立企业商铺 在线洽谈生意

0条 [查看全部]  相关评论
网站首页 | 广告图文 | 付款方式 | 关于我们 | 版权隐私 | 联系方式 | 诚聘英才 | 网站地图 | 排名推广 | 广告服务 | 积分换礼 | 网站留言 | RSS订阅 | 鲁ICP备15018724号
Powered by DESTOON